I know you are wondering how much epoxy do I want to cover my artwork? Like you have made a painting and want to cover it with resin. Why do you want to cover it with resin? You wish that your painting must be shiny and glossy. Now the question is how much resin should I mix and what’s the ratio? Resintools.com will tell you about the quantity and even the mixture is not wasted at all.
Before explaining the ratio and getting into numbers, few things are here to explain.
- Use doming resin when trying to cover your artwork.
- Doming resins have a self-level that depth is ⅛ inch.
- Casting resins do not contain self-level. And casting resin is not reasonable for covering your work.
In simple words don’t scrimp the amount of resin? Resin is quite expensive, you must mix the correct ratio for covering your art. But if you mix less amount of resin it makes the surface rough and fish eyes. Yes, remember, mix a little more than that you need. Here we discuss a few ideas with you.
A clean and dry surface is highly recommended. Let’s discuss why it’s important if you make your artwork on the oily surface, the paints will not dry. Also, it may not be cured. If it takes much time to cure, the sticky holes are left and they will vanish in your hard work. And you will not get a perfect finishing.
Calculating the mixture
Math is not very hard. But using a resin calculator that is easily available online will calculate the amount of resin in milliliters and ounces. Moreover, this calculator is really helpful that your resin will not be wasted. Just mix it, calculate it, and pour it on your artwork.
Most of the coating epoxies coat approximately 12 square feet per mixed gallon (1/2 Gal Part A and 1/2 Gal Part B) and at ⅛ inch thickness.
How thick epoxy resin should you pour?
More epoxy resin is designed to make a coat that is ⅛ inch thick. Do you think this thickness is enough? If you need more thickness then mix more resin. If you need a thin layer then mix less resin, but don’t mix a thin layer. The general rule of resin is ⅛ thick, so follow this rule neither make it more thick or thin.
To make it thicker it needs a mold to hold it. These means don’t make a thick layer for resin art. and also make sure epoxy resin is not running off the edges.
Tip for you: Do not buy casting resin
Casting resin is thinner than doming resin and it is not designed to coat your art. It spreads fast so it is not eligible for your art. Moreover, casting resin does not have a good outcome when you are putting a layer to coat it. Also, they will not deliver the same level with durable work. In simple words casting resin is not strong due to the thin layer.
Another tip for you
You must have more mixture with you than you need. Because when you are pouring it your mixture should not be finished while pouring it. If the resin is finished you have to restart the process again and pour it again. So remember, you must contain enough epoxy with you if you restart the process it will be also costly for you as well.
How much epoxy do I want to cover my artwork? The exact amount is written on the brand that you are using. While you know the general rule ⅛ inch thick.When you are buying a resin double check that and mix a little more than you are required. In the end, a resin calculator is available online, you can make a mixture according to it.